ATTENTION!!!! Please bear with us while we make some updates to the Forum and Website, Thanks.......


    twin turbo

    Share
    avatar
    reborn

    Posts : 173
    Reputation : 0
    Join date : 2009-05-21
    Age : 41
    Location : ellabell, ga

    twin turbo

    Post  reborn on Mon May 25, 2009 9:16 pm

    ok here is what i have found i can go with 12 psi boost with changing nothing except the map in the ecu. if i lower the compretion and get bigger injectors i can go up to 20 psi. and if i go with lower compretion and find an alum. intake i can go upto 30 psi. so ok guys what do i do..... drunken

    20 psi will cost about 1000.00
    30 psi i cant find an alum. intake that will fit under the hood. maybe someone else can find it.

    anyway it will be boosted by twins but to get to the magic 1000hp i need to be at 20psi or i fall short with 10 psi at 800hp
    let me know what you all think confused
    avatar
    Kurai

    Posts : 1015
    Reputation : 3
    Join date : 2009-05-21
    Age : 37
    Location : Savannah, GA

    Re: twin turbo

    Post  Kurai on Mon May 25, 2009 11:10 pm

    If you are gonna do the AWD setup then you might as well go big or go home and get the intake manifolds and go for 1000hp Twisted Evil
    avatar
    ILLEST
    Admin

    Posts : 82
    Reputation : 0
    Join date : 2009-05-21
    Age : 33

    Re: twin turbo

    Post  ILLEST on Tue May 26, 2009 6:26 am

    I would do the AWD setup before I think about boosting to 1000hp, you will be a
    -10 sec 1/4mile with awd and 1000hp, so lets worry bout getting the power to the ground then you can frankenstien the engine. lol
    avatar
    reborn

    Posts : 173
    Reputation : 0
    Join date : 2009-05-21
    Age : 41
    Location : ellabell, ga

    Re: twin turbo

    Post  reborn on Tue May 26, 2009 8:27 pm

    ok well here is what i got the tranfer box will bolt right up might have to widen the drive tunnel. drive shaft for rear just will need shortend (no big deal) and one for fround just made (once again no big deal). here is the trick frount diff. have to get it in there. good news is that the gears in it are the same as in the back of the vette...3.42. so the only real hard thing i am going to have is getting in the frount diff.

    calling all crazy car guys to put it in....lol affraid

    now as far as price found brand new tranzfer box 500
    as far as frount diff 500 again

    so looking at 1000 plus drive shafts and i am sure i will have to have custom brackets made to put in the frount end.
    avatar
    Kurai

    Posts : 1015
    Reputation : 3
    Join date : 2009-05-21
    Age : 37
    Location : Savannah, GA

    Re: twin turbo

    Post  Kurai on Tue May 26, 2009 8:38 pm

    Hmmmm so what u think it will cost grand total?
    avatar
    reborn

    Posts : 173
    Reputation : 0
    Join date : 2009-05-21
    Age : 41
    Location : ellabell, ga

    Re: twin turbo

    Post  reborn on Tue May 26, 2009 8:44 pm

    dont know thinking under 2000.00 just because doing it most here just have to have brakets and stuff made i dont have the stuff to do it as far as install i think i can do it. if not i know some one that can.
    avatar
    DangerRanger

    Posts : 7
    Reputation : 0
    Join date : 2010-02-24
    Location : Bagram, Afghanistan

    Re: twin turbo

    Post  DangerRanger on Wed Feb 24, 2010 9:12 pm

    well once you get the front diff mounted and you can shorten an existing drive shaft at a machine shop for cheap so you can save a few bucks there.
    now for the same gear ratio as long as your tire DIAMETER is the same front and rear you are good. some have slightly smaller front tires up front so a crazy mathematic equation would have to be in place to find out what the ratio should be....just a thought
    avatar
    Starlet 3SGTE

    Posts : 181
    Reputation : 0
    Join date : 2010-01-26
    Age : 54
    Location : Savannah GA

    Re: twin turbo

    Post  Starlet 3SGTE on Thu Feb 25, 2010 2:49 am

    I've got a few questions.

    1 how much hp will the extra diff and transfer case pull off the engine?

    2 will the hubs have a clutch to allow the faster outside front wheel to freewheel or will the diff have to handle it?

    3 how much does all the extra parts weigh?

    I don't mean to sound like I'm against your project, I'm just concerned what weight does to power. I started to go with a quick change rear until a buddy that races round track told me how much extra hp they pull.
    avatar
    Kurai

    Posts : 1015
    Reputation : 3
    Join date : 2009-05-21
    Age : 37
    Location : Savannah, GA

    Re: twin turbo

    Post  Kurai on Thu Feb 25, 2010 5:37 am

    idk if he is even still considering this lol but maybe after he gets use to his new toys he will lol
    avatar
    DangerRanger

    Posts : 7
    Reputation : 0
    Join date : 2010-02-24
    Location : Bagram, Afghanistan

    Re: twin turbo

    Post  DangerRanger on Thu Feb 25, 2010 5:53 pm

    well a front diff will take some power away BUT if you cant get the power to the ground power is useless like my ranger will be faster if with 4wd beacuse it will allow me to hook up from the get go.
    avatar
    moneybaggz

    Posts : 207
    Reputation : 0
    Join date : 2009-05-21
    Age : 31
    Location : Need to know bases

    Re: twin turbo

    Post  moneybaggz on Fri Feb 26, 2010 11:09 am

    well hell in that case all cars would be faster. they should just make them all awd
    avatar
    Kurai

    Posts : 1015
    Reputation : 3
    Join date : 2009-05-21
    Age : 37
    Location : Savannah, GA

    Re: twin turbo

    Post  Kurai on Sat Feb 27, 2010 5:40 am

    They have good accel but doesnt make them the fastest u see how alot of the fastest in the world are RWD
    avatar
    moneybaggz

    Posts : 207
    Reputation : 0
    Join date : 2009-05-21
    Age : 31
    Location : Need to know bases

    Re: twin turbo

    Post  moneybaggz on Sat Feb 27, 2010 11:27 am

    i still would love to get an awd set up

    Sponsored content

    Re: twin turbo

    Post  Sponsored content


      Current date/time is Thu Nov 23, 2017 8:02 am